Encore Yakovlev Yak-9 Build in 1/72 Scale Part I

DSC_8294
Lurking in the stash was this Yak-9 in an Encore Models box. This kit was first issued by Dakoplast in 1997, then Encore, then Eastern Express, and finally Modelist. It is not considered to be a good kit by those who know the Yak-9 and is known to have several shape issues. I am not an expert on the type therefore the shape issues don’t jump out at me so I decided to build the kit along with all the other Yaks. When else would I ever build one?

DSC_8295
The box contained two sprues with a lot of mold release. I wash all my sprues in hot soapy water before beginning construction. These got a good long soak. When done there was still some discoloration but no sign of oil. The two fuselages are there to account for the different placement of the cockpit and radiator between different subtypes.

DSC_8332
The cockpit is basic. The control column looked like it would be more trouble than it was worth to clean up so I substituted one made from wire.

DSC_8333
The wheelwells have some detail but there are gaps showing up into the fuselage and at the rear of the well. Another Yak kit which will need some work with Evergreen card.

DSC_8339
The cockpit under a coat of paint, what there is of it. Not super detailed but the basics are in place.

DSC_8347
There are some gaps on the underside seams which will need addressed. You can see the card used to close up the wheelwells in this photo as well.

DSC_8348
There is a pronounced step at the wing joint which will take some filling. At this point I should also mention that the clear canopy was beyond useless – it looked like it had been squished and no way was it ever going to fit. I used one for a Yak-3 from a Falcon vacuform set which looked much, much better and actually fit pretty well.

8 thoughts on “Encore Yakovlev Yak-9 Build in 1/72 Scale Part I

  1. Hi Jeff,
    Happy you’re working on this kit as it’s on my short list of models to do. I wanted to point out that the Encore kit is actually a re-pop of the ICM kit (with its accuracy issues) rather than the Dakoplast kit that is supposed to be a pretty good rendition of the Yak 9. I have the ICM, Encore and Dakoplast kits and I can say positively that the Encore kit is not the Dakoplast molding. Love your work and thank you for posting it.

    Marc

    Liked by 1 person

  2. You are a brave man! I have a few older kits that I figure I’ll never touch, especially if there’s a better alternative! I have no doubt you’ll make the best of it.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s