Dragon Messerschmitt P.1101 Build Part I

This is Dragon’s 1993 kit of the Messerschmitt P.1101, which was later re-released by Revell. The P.1101 prototype was 80% complete at the end of the war and was being developed as an experimental testbed to study the effects of wing sweep angle on compressibility. In the U.S., Bell built the X-5 for the same purpose, a design clearly “inspired” by Messerschmitt’s work. I’ll be building two of these as “what if” (whiffer) models in operational markings and camouflage.
The parts are well-molded and feature finely recessed detail. Not a lot of parts on this one, but they do include a sprue with four Ruhrstahl X-4 air-to-air missiles, a nice touch. The Ruhrstahl X-4 was in production at the end of the war but was not used operationally. More on the Ruhrstahl X-4 in a previous post here: https://inchhighguy.wordpress.com/2019/07/31/rurhstahl-x-4-guided-missile/
The fuselage traps the engine assembly, which also serves as the nose wheel well. These parts required some test fitting to get everything aligned and closed up. Since this design used a tricycle landing gear configuration I added weight in the form of fishing sinkers and epoxy to keep it from being a tail-sitter.
The engines were painted and washed prior to sealing up the fuselage. Only the back section of the engines will be visible on the finished model. Dragon includes a small PE fret with cockpit details, but this appears to be made from stainless steel and I found the parts impossible to cut from the frets. Cockpit details on my models are from frets found in the spares box.
I attached the landing gear legs early to make sure I could get them in past the fuselage sides. Putting them in later would have been difficult with the mounting tabs in place and I wanted a secure fit. Seatbelts are from an Eduard PE fret.
Here the fuselage is joined and re-scribed. I applied MEK thin glue over the scribed panel lines to remove any burrs. I like the shape of this assembly, with a few adjustments this could serve as the basis for any number of futuristic vehicle projects.