First to Fight Polish TKS Tankette Build in 1/72 Scale

This is kit number PL1939-001 from Polish manufacturer First to Fight. It was initially released in 2013, and re-released in 2019 with a turned metal gun barrel. It is an interesting design, and quite small. It carried a crew of two and makes me wonder just where is the line for being too small to be considered a tank. The main gun is a 20mm cannon, there was another version which carried a machine gun instead, which First to Fight also kits.
There is only a single sprue which contains twelve parts, plus a turned brass barrel which is a very nice touch. The suspension is mercifully molded as a single piece for each side and is very well detailed. For many subjects this approach is adequate for 1/72 scale, and much easier to build (and align!) than a pile of tweezer-bait. Instructions and a painting guide are printed on the back of the box.
The hull is split into top and bottom pieces. There is a gap under the mudguards, which is not obvious on the finished model from normal viewing angles but only takes a couple of minutes to fill with plastic card.
Assembly complete. The brass barrel is a nice touch as the molded barrel would be difficult to clean up and keep straight. I cut off the handles on the front plates and replaced them with wire stock, a simple improvement which enhances the looks of the model.
The model was primed with Mr. Surfacer to check for flaws, and then with black Alclad primer.
I followed the illustration on the box art for the camouflage scheme. It is interesting that the colors are so similar to those adopted by the Wehrmacht in 1943.
Here is the finished model after a panel wash and a light coat of dust. This kit goes together well and its simplicity and low parts count makes it a perfect choice for a quick build.