1/72 Scale N1K Kyofu / Shiden Batch Build Part II

ShidenBatch_11
Here are the engines ready for painting.  The two on the left are for Hasegawa’s Kyofu, in the light tan is Tamiya’s Shiden, and the rest are cast replacements using the Kyofu engine and Aoshima gearbox.  All the engines have ignition wires added using beading wire from the local crafts store.
ShidenBatch_12
Cockpits are arranged in a similar manner, taped to card and awaiting paint.  All have been enhanced with the addition of various levers and other details using Evergreen stock and wire.
ShidenBatch_13
I start with a base coat of black to emphasize the shadows.  The green cockpit color is painted over that, but is not sprayed to completely cover the black in the deepest recesses.  Then lighter mixes of the green are sprayed on, the last being a thin mix from directly above.  The intention is to artificially create the effect of light and shadow within the cockpit.
ShidenBatch_14
Here is the finished effect after painting.  The instrument panels, radios, and seatbelts are graphics printed to scale on photographic paper, cut out and positioned in the cockpits.  The paper gives the belts a thickness which is lacking in PE seatbelts.  I know it’s cheating but it works!  The knobs and levers were picked out in the appropriate colors and everything received a wash to bring out the details.
ShidenBatch_15
The engines received a coat of Alclad Aluminum and Tamiya Panel Line Wash.
ShidenBatch_16
While things were drying I began assembly of the major components.  This is an unusual feature of the Hasegawa Kyofu – a plastic weight trapped inside the float.  Oddly there were no deformities from shrinkage on these parts.  Hopefully Hasegawa knows what they are doing and this is enough weight, but I was tempted to add more.
ShidenBatch_17
These are the replacement cockpit tubs inside the Hasegawa Shiden Kai fuselages, a big improvement over the kit parts.  The kits had the front of the cockpit opening over the instrument panels decked over, this was removed.  Also note the oval shaped openings which were drilled out aft of the antenna masts.  This was for a small window which allowed light to enter the fuselage interior to help when servicing the aircraft.

Part III here: https://inchhighguy.wordpress.com/2019/12/27/1-72-scale-n1k-kyofu-shiden-batch-build-part-iii/

11 thoughts on “1/72 Scale N1K Kyofu / Shiden Batch Build Part II

  1. Jeff, your group builds always amaze me! As a guy who struggles to finish one a year, I can only stare in wonder.

    I’m confused by the cross-kitting of engines though. “Rex” and “George” had quite different engines. The N1K1 used the 14-cylinder Mitsubishi Kasei engine, while the N1K1-J and N1K2-J used the 18-cylinder Nakajima Homare.

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s